Frosted manifestation dots on glass folding doors between a bar seating area and an outdoor courtyard

Part M is there so people don't walk into glass. In a busy building, a clear glass panel has to be made visible, and manifestation dots are how you do it. Ours are crystal etch, a frosted finish, and they meet every requirement of the regulations.

Where Part M wants the manifestation

The regulations ask for permanent, visible markers on glass panels in two zones, measured from floor level:

  • Zone 1: 850mm to 1000mm
  • Zone 2: 1400mm to 1600mm

The markers have to contrast with whatever is behind them, and you have to be able to see them from both sides of the glass. Crystal etch reads as frosted glass, so it shows up clearly against any backdrop.

Three manifestation patterns, ready to ship

We stock three designs, all 50mm high:

  • Round dots, 50mm across
  • Squares, 50mm x 50mm
  • Rectangles, 25mm wide x 50mm high

Each one comes pre-spaced with a 50mm gap from the edge of one piece to the next, on clear application tape. You buy them by the metre, so measure the width of your glass and round up. Crystal etch works indoors and outdoors, and the frosted look suits most buildings.

How long crystal etch lasts on glass

We use commercial-grade material that stands up to Irish weather. The crystal etch resists UV light, so it stays clear and visible and won't yellow or fade. The adhesive is strong and every marker stays where you put it. It's a permanent fix for glass safety.

Custom manifestation with your logo

The standard patterns cover most spaces. If you'd rather the glass carried your logo, your own decorative pattern or a full-height manifestation, we make that too, from your artwork. Custom work still meets Part M.

Fitting them yourself

Everything you need to fit them properly comes with the order:

  • Pre-spaced patterns on application tape
  • A full installation guide
  • Height marking guides
  • Surface preparation instructions

They go on glass in:

  • Office buildings
  • Retail spaces
  • Hotels
  • Hospitals
  • Schools
  • Public buildings

Ordering manifestation dots

Measure your glass panels and pick a pattern. Not sure how many linear metres that comes to? Send us the measurements and we'll work it out with you. Standard patterns ship next day. Custom designs take 3 to 5 working days.

Order the standard patterns online, or talk to us about custom. Sample packs are available on request if you want to see the finish first.

Fitting Part M safety dots for you

If you'd rather not fit them yourself, we can arrange fitting. Our fitters are fully insured and hold an up-to-date Safe Pass. They use laser guides, so the dots go on correctly and pass inspection.

Printing Options
Incl. VAT
Printing Cost:€10.00
Printing Cost(Including VAT): €12.30
Cost Per Unit:€10.00
Cost Per Unit:€12.30
Please enter Eircode
Estimated Total:€10.00

Place your order within

00HRS
00MINS
00SECS

and we will dispatch your order on

Order Now

What customers say

We’ve been dealing with WeDoPrinting for the best part of 10 years. Cian and his team are reliable, fast and flexible, and I would have no hesitation recommending their services.

John D'Arcy

I have used We Do Printing for a number of different projects through the years for my clients and they have never let us down. Their service has always been quick efficient and thoroughly professional.

Catriona Byrne

Read all our reviews

FAQs

Two zones, measured from floor level: 850mm to 1000mm, and 1400mm to 1600mm. The markers have to contrast with what's behind them and be visible from both sides of the glass.

Our dots are 50mm across, with a 50mm gap from the edge of one piece to the next, on clear application tape. We also do 50mm squares and 25mm x 50mm rectangles at the same 50mm gap.

Yes. They come pre-spaced on application tape, with an installation guide, height marking guides and surface preparation instructions. If you'd rather not, we can arrange fitting.

Yes. Crystal etch works indoors and outdoors. It resists UV, so it stays clear and won't yellow or fade.

Standard patterns ship next day. Custom designs, like your logo or a full-height manifestation, take 3 to 5 working days.

Design Guidelines

Ready to create your product design?
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customisation options.
Help template cannot be generated as one or both bleed sizes (height and width) are set to 0.
Bleed Line
Safe Line