
Printed bottle collars hang on the neck of a bottle and carry a price, an offer, a tasting note or a QR code. Off licences use them to pick out one wine on a busy shelf, and breweries and distilleries hang them on a new release. Ours are 400gsm card, matt laminated on both sides and printed in full colour on both sides, from a minimum of 250. They're shaped and creased, and they arrive flat. You'll also see them called bottle neck tags. They sit with the rest of our hospitality printing.
Three bottle collar shapes
- Small, cut from 55 x 170mm
- Medium, cut from 105 x 148mm
- Large, cut from 99 x 210mm
- 250 to 3,000 in 250s, then 5,000 and up to 25,000
All three fit over most bottles. Small is the narrow one, Large gives you the most room for a message.
Pop the hole, then try it on your bottle
The neck hole is cut but left in place, so you pop it out yourself. Before you order 5,000, check the hole against your bottle. A wine bottle, a craft beer and a gin bottle don't have the same neck. If you're not sure, order 250 first and try them on the real thing.
Where the words go on a bottle collar
The top of the collar sits around the neck, so anything near the hole or the crease gets hidden or bent. Keep the price and the offer on the part that hangs down. The back is printed too, and it's what people read when they pick the bottle up, so that's the place for a tasting note or a QR code.
If you want to write prices on by hand, a biro tends to skip on matt laminate. Use a permanent marker, or print the price if it isn't going to change.
What bottle collars won't do
Lamination protects the front and the back, but not the edges. Picture a sandwich: laminate on the front, laminate on the back, card in the middle. Look at it from the side and you can see the card. So a collar is fine in a fridge or on a shelf, but leave one sitting in an ice bucket and the water wicks in at the edges.
They're also not stick-on bottle labels, and they come flat, so you put them on the bottles yourself. We only do these three shapes for now, no custom cutting. For the bar or the table, have a look at our personalised beer mats.
Bottle Collars
Place your order within
and we will dispatch your order on
What customers say
I have worked with Cian & Izzy for over 10 years now. From small runs to big large format campaigns they have provided same amazing service.
Al Kennington
Printing is one thing we never worry about because we know we're in safe hands.
Stephen Kennedy
FAQs
Three. Small is cut from 55 x 170mm, medium from 105 x 148mm and large from 99 x 210mm.
250. Then in 250s up to 3,000, and 5,000, 10,000, 15,000, 20,000 or 25,000 after that.
Check first. Necks vary between wine, beer and spirits bottles. If you're not sure, order the minimum of 250 and try one on before a big run.
Yes, full colour on both sides as standard. Use the back for a tasting note, a QR code or the story of the bottle.
No. The matt laminate protects the front and back, but the edges are bare card, so water gets in there. Fine in a fridge or on a shelf. Not in an ice bucket.
They come flat, shaped and creased. Pop out the neck hole, fold along the crease and slip it over the bottle.
Design Guidelines
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customisation options.




